The Petroleum Act, 1886, 12 of 1886, (Rep., Act 8 of 1899)

Section 1. Preparing the water-bath

Repealed or not in force · As amended up to 2026-08

1. Preparing the water-bath.—The water-bath is filled by pouring water into the funnel until it begins to flow out at the overflow-pipe. The temperature of the water at the commencement of each test, as indicated by the long bulb thermometer, is to be 130° Fahrenheit, and this is attained in the first instance by mixing hot and cold water, either in the bath or in a vessel from which the bath is filled, until the thermometer which is provided for testing the temperature of the water gives the proper 1886.] Petroleum. 151 (The Schedule.) proper indication; or the water is heated by means of the spirit-lamp (which is attached to the stand of the apparatus) until the required temperature is indicated. 1. (1) This Act may be called the Petroleum Act, 1886; and (2) It shall come into force on such day as the Governor General in Council, by notification in the Gazette of India, appoints. (3) The provisions of this Act relating to dangerous petroleum, and the importation of petroleum, extend to the whole of British India. The rest of this Act extends only to such local areas as the Local Government may from time to time, by notification in the official Gazette, direct. (4) Any power conferred by this Act to make rules or issue orders may be exercised at any time after the passing of this Act; but a rule or order so made or issued shall not take effect until the Act comes into force. 1. Drawing the sample.—In all cases the testing officer or some person duly authorised by him shall personally superintend the drawing of the sample from an original unopened tin or other vessel. An opening sufficiently large to admit of the oil being rapidly poured or syphoned from the tin or other vessel shall be made. Two bottles, each of the capacity of about 40 fluid ounces, are to be filled with the oil. One of these, the contents of which is intended to be preserved for reference in case of need, is to be carefully corked, the cork being well driven home, cut off level with the neck, and melted sealing-wax worked into it. The other bottle may be either stoppered or corked.

Source: India Code